This guide contains all the information regarding the EDL Mode along with the required methods to enter successfully into EDL Mode. If you want to know What EDL Mode is? How to access the EDL mode? Follow this guide to the end and hopefully you will easily get into it by implementing different methods mentioned in this post.
First of all, you should learn about EDL Mode. What is the purpose of EDL Mode? Let’s get to the brief description of EDL Mode.
About EDL Mode
EDL stands for “Emergency Download Mode” and this mode is a handy way-out when there is no other option left to recover your smartphone from a bricked state. Therefore, when your phone software’s becomes completely dead and you couldn’t follow up with other methods to flash the firmware, then the EDL Mode comes in handy.
What Operations Does EDL Mode Can Do?
- It allows you to bypass pass-codes and gain complete access to the device.
- You can flash firmware file on your smartphone, even It is in a hard bricked state.
- It helps you to restore your smartphone from a bricked state to an unbricked state.
To access the EDL Mode is a bit tricky process, but if you follow the methods carefully, you can easily boot your phone into EDL Mode.
Is EDL Mode Available in All Android Smartphones?
It can only be available on the Android smartphones with Qualcomm Chipset, as the OEMs comes up with an idea to give user’s a chance of still recovering their smartphones from brick state to unbrick state.
EDL Mode is also known as Qualcomm 9008 Mode.
Is There Any Equipment To Access EDL Mode?
Yes, there is a cable known as Deep Flash Cable that is specifically designed for Qualcomm chipset based smartphones. This cable can help you enter EDL Mode directly. You can further do different operations with the help of tools such as flashing firmware, and etc.
How To Boot Xiaomi Black Shark 4S Pro Smartphones Into EDL Mode (Methods)
Let catch-up with the main guide that could let you enter into EDL Mode. Carefully, follow all the methods with all steps mentioned below. Among of all methods what best reflects your situation, adopt it and implement it.
Pre-Requisities
- Download and Install USB Drivers for Xiaomi Black Shark 4S Pro.
- Make sure to enable USB Debugging option.
- Download and Install ADB & Fastboot Drivers.
- Keep that in mind, It only works for Qualcomm chipset based smartphones.
Methods 1: How To Boot Into EDL Mode Using ADB Commands?
Steps 1: Make sure, that you have installed the ADB drivers and enabled the USB debugging on your smartphone.
Step 2: Launch the command prompt window on your PC/Laptop.
Step 3: Grab the original cable and connect your phone to a computer.
Step 4: To verify, If you smartphone is connected successfully or not, type in the following command:
adb device
Step 5: If your phone is connected successfully, now type the following command to enter EDL Mode:
adb reboot edl
Finally, your Xiaomi Black Shark 4S Pro phone is in EDL Mode successfully.
Method 2: How To Boot Into EDL Mode Using Fastboot Mode?
Step 1: Turn OFF your smartphone.
Step 2: Boot your phone into Fastboot Mode.
Step 3: Once, you are in fastboot mode, now connect your smartphone to a computer.
Step 4: Open the command prompt and type in with the following commands until your enter into EDL Mode:
fastboot oem edl
OR
fastboot reboot-edl
OR
fastboot reboot edl
That’s how , you can enter EDL mode on qualcomm chipset based smartphones with help of fastboot mode.
Method 3: How To Boot Into EDL Mode Using Physical Buttons?
Step 1: Make sure to turn OFF your smartphone.
Step 2: Now, Simultaneously press and hold power and volume Down buttons and instantly connect your smartphone to a computer while still holding the buttons.
Step 3: This process will forcefully boot your smartphone into EDL Mode.
Method 4: How To Boot Into EDL Mode Using Deep Flash Cable/EDL Cable?
Deep flash cable also known as EDL cable will help you enter your smartphone into EDL Mode. This cable is specifically designed for qualcomm chispet based smartphones. Once, you connect your smartphone to a computer with the help of Deep flash cable, you will be able to do operations like flashing firmware and etc.
This cable will successfully put your device into qualcomm 9008 Mode.
Methods 5: How To Boot Into EDL Mode Using PCB Test Points
This method is a bit tricky and requires bit hardware knowledge where you will need to cope with the smartphone hardware component to enter EDL Mode.
The need of this method is required in the most extreme situation where your phone is hard bricked and you have no alternative options left to restore your smartphone from that state. Or the above all methods couldn’t help you to enter EDL mode to flash the firmware.
Follow the steps below carefully!
Step 1: Download Test Point tool, where you can find different smartphone models test points position in hardware area.
Step 2: Once, you find out the position of test point on your smartphone visually with the help of the tool, now download MIUI ROM flashing tool for your Xiaomi Black Shark 4S Pro.
Step 3: Now, grab your smartphone and pull the back cover to remove it from your smartphone, so that to access the hardware area. Note: remove the back cover slowly, be soft with your hands as not to damage the the clips and locks.
Step 4: Once, you are done with this part, insert the USB cable connector to smartphone yet, not with the computer for now.
Step 5: Locate the test points on your smartphone hardware area.
Step 6: Take the equipment such as tweezers that would be more suitable and place every tip of it onto one of those test points to make a short-circuit.
Step 7: While still placing the tweezers onto the test points, now plug-in the USB cable to your computer.
Step 8: Open the device manager and you will be able to see the COM port named as Qualcomm HS-USB QDLoader 9008. That means your device is connected and entered EDL Mode successfully.
Step 9: Now, select the flashing ROM file on flash tool and and click the “Flash” to start the flashing process.
How To Activate Developer Mode To Enable USB Debugging and OEM Unlocking?
Grab your Xiaomi Black Shark 4S Pro smartphone and tap on “Settings”.
Now, Tap on “About Phone – > MIUI Version”.
Tap on the MIUI Version several times until you get a message “you are now a developer”.
After that, access the “Additional system settings” in the main settings area.
When you got into the additional system settings, now go to the developer option and enable both USB debugging and OEM unlocking options.
How To Boot Xiaomi Black Shark 4S Pro Smartphones Into Fastboot Mode?
- Turn your Phone Off Completely.
- Now, press and hold Volume Down, and Power buttons simultaneously.
- Once, the fastboot interface appears on the screen, release all the buttons.
Now Your Xiaomi Black Shark 4S Pro smartphone is in Fastboot Mode!
Xiaomi Black Shark 4S Pro Specifications
The phone is equipped with of 6.67 inches Super AMOLED touchscreen display, providing the resolution of 1080 x 2400 pixels.
It runs on Android 11 including Joy UI 12.8 powered by an Octa-Core processor. Moreover, It provides internal storage of 256/512 GB paired with 8/12/16 GB of RAM.
The camera features Triple 64MP + 8MP + 5MP primary lens with LED flash including other features. In addition, a 20MP secondary lens for selfies is available at front.
The connectivity options available on the phone are WLAN, Bluetooth, NFC, GPS, and USB. It is powered by Li-Po 4500 battery. Officially available in Black, and White colors.
Price of Xiaomi Black Shark 4S Pro Black Shark 4S Pro starts from 650 EUR.